Centrifuge Bench Top Model 228

A centrifuge mechanically subjects fluids to increased G forces that accelerate the settling rate of particles within the fluid. This procedure separates particles from fluids into heavy-coarse and light-fine fractions and is dependent upon separation by particle size and specific gravity.

Features:

• Speeds to 3300rpm/1380xG
• Accepts six tubes 15mL
• Built-in timer 0 to 15 minutes with 30 sec. resolution HOLD position allows continuous runs
• Quiet-running, permanently lubricated, long-life motor
• Numbered rotor positions, Fixed-angle rotor
• 115V 60Hz, 2.1A

Centrifuge Manually Operated Model 18801

A centrifuge mechanically subjects fluids to increased G forces that accelerate the settling rate of particles within the fluid. This procedure separates particles from fluids into heavy-coarse and light-fine fractions and is dependent upon separation by particle size and specific gravity.

This hand driven centrifuge is perfect for field use. The simple compact design eliminates complicated operation and assures years of dependable service. The centrifuge body is constructed of lightweight aluminum alloy with an integral clamp for fixing to a table. Removable pin connections for head and crank handle make storage easy. The maximum speed is 2,000 RPM.

Centrifuge Non-Heated Model 18206

A centrifuge mechanically subjects fluids to increased G forces that accelerate the settling rate of particles within the fluid. This procedure separates particles from fluids into heavy-coarse and light-fine fractions and is dependent upon separation by particle size and specific gravity.

This centrifuge is ideally suited where testing does not require heat during the centrifuging period. This unit will meet the requirements of the API MPMS Chapter 10.4 Determination of Water and Sediment in Crude Oil by the Centrifuge Method (Field Procedure).